C610C-NW Slitter Rewinder

C610C-NW Slitter Rewinder

C610C-NW Slitter Rewinder

cantilevered slitter equipment

The Industry Standard For Narrow Slits

The C610C-NW is designed to function as a downstream slitter for today’s narrow web presses. Its ease of setup and ability to quickly load and unload rolls, facilitate a ‘just-in-time’ operation. A differential rewind system compensates for gauge variation allowing the C610B-NW to rewind non-uniform web constructions.

The C610C-NW duplex rewind mandrels eliminate web interweaving while providing sensitive tension control for each rewind roll. The C610C-NW slitter rewinder can be operated in a ‘minimum gap mode’ for adhesives or cold seals as well as a dedicated narrow width option for narrow web rewind applications.

For inspection applications, an optional overhead long in-feed web path allows the operator to examine the print in a convenient location above the rewinds. Full operator control and inspection can be performed from one location. This extended web path allows the operator to stop the web prior to defected material making it through to the rewind.

The C610C-NW offers an integrated ‘integral’ unwind providing a small footprint. The stand is equipped with linear bearing slides. The control system provides automatic web tension control through a pneumatic brake. Several unwind options are available including an upgrade to a separate shaftless stand.


related equipment

Slitter Model Slitter Type Rewind Diameter
Model C610C Cantilevered Duplex 24"/610mm
Model C800C Cantilevered Duplex 32"/800mm
Model C1000C Cantilevered Duplex 40"/1000mm

 

C610C-NW

24" Max Rewind Dia.
  • Web widths: 32″/40″ (800/1000mm)
  • Duplex Rewind
  • Center Wind-Design
  • Cantilevered Rewind


C610C

24" Max Rewind Dia.
  • Web widths: 63″+ (1600 mm+)
  • Duplex Rewind
  • Center-Wind Design
  • Cantilevered Rewind


C800C

32" Max Rewind Dia.
  • Web widths: 63″+ (1600 mm+)
  • Duplex Rewind
  • Center-Wind Design
  • Cantilevered Rewind


C1000C

40" Max Rewind Dia.
  • Web widths: 63″+ (1600 mm+)
  • Duplex Rewind
  • Center-Wind Design
  • Cantilevered Rewind


Improve Your Roll Quality

Deacro’s roll lock differential air shafts provide the most sensitive tension control in the converting industry. The unique spacer-less setup design eliminates the need for operators to handle tooling or to manually position core stops. To load the cores, operators simply slide them across the rewind shaft.

More on Lay-on Systems…

Another critical aspect of quality winding is precise control over lay-on pressure. Deacro offers several lay-on configurations to provide sensitive and versatile lay-on control. These configurations include bi-directional pneumatic or servo control. Modes of the servo configuration include pneumatic bi-directional, narrow web, minimum gap and segmented differential lay-on.

Save Time Setting The Rewind

Reducing slitter setup time is a necessity in today’s market. Because of this, Deacro offers a variety of quick rewind setup options with its laser core positioning system and differential air shaft technology. These features allow operators to save time during rewind setup. To locate cores, operators simply slide cores across the cantilevered shaft. After cores have been moved onto the shaft, the laser locating system automatically indicates the precise location of the core for easy, quick and accurate placement on the shafts.

More on Rewind Technology…

Laser Core Positioning

Laser Core Positioning

Save Time Setting Knives

Deacro offers a range of automatic and manual knife setup options with its auto knife positioning system and digital knife display technology. Deacro’s auto knife positioning system allows operators to attend other areas of the slitter while the knives are automatically being positioned. For manual positioning, Deacro offers the digital knife display. This feature displays the current knife location in relation to the pre-set location. These features are designed to assist the operator during the knife setup stage of the slitter operation.

More on Slitting Systems…

Auto Knife Positioning

Auto Knife Positioning

Unwind Technology

Several unwind options have been designed to integrate with Deacro’s center winders. Deacro slitters come with the option of the US1000A shaftless unwind stand, or the US1300D shaftless unwind stand. These stands are designed to facilitate efficient handling of the master roll.

More on Unwind Technology…

The unwind base and arm sides consist of high capacity linear bearing rails which are easily maintained. Options for these unwind stands include a position regulated dancer, a “walk-over” plate, splice table, pack roller, and an AC-vector driven unwind configuration.