Automated Large Roll Slitting
Innovative designs have slashed required slitter setup time. At the touch of a button, the slitter can be set to the correct running parameters. The slitter can automatically position knives and cores, or it can indicate the core location for the operator.
After the finished rolls have been removed, the unload tables can then automatically load a new set of cores accurately placed on the rewind shafts. The finished set can then be transferred to V conveyors. A set change is as simple as recalling a new file through the color touch screen. Operators never need to handle rewind tooling, handle shafts, setup knives or manually move rolls.
related equipment
| Slitter Model | Slitter Type | Rewind Diameter |
|---|---|---|
| Model CSR1300C | Center-Surface | 50"/1300mm |
CS1000B
- Web widths: 63-106″ (1600-2700mm)
- Duplex Rewind
- Center-Surface Design
- Cantilevered Rewind
CSR1300C
- Web widths: 63″+ (1600 mm+)
- Duplex Rewind
- Center-Surface Design
- Cantilevered Rewind
Improve Your Roll Quality
Save Time Setting The Rewind
Reducing slitter setup time is a necessity in today’s market. Because of this, Deacro offers a variety of quick rewind setup options with its laser core positioning system and differential air shaft technology. These features allow operators to save time during rewind setup. To locate cores, operators simply slide cores across the cantilevered shaft. After cores have been moved onto the shaft, the laser locating system automatically indicates the precise location of the core for easy, quick and accurate placement on the shafts.
Laser Core Positioning
Save Time Setting Knives
Deacro offers a range of automatic and manual knife setup options with its auto knife positioning system and digital knife display technology. Deacro’s auto knife positioning system allows operators to attend other areas of the slitter while the knives are automatically being positioned. For manual positioning, Deacro offers the digital knife display. This feature displays the current knife location in relation to the pre-set location. These features are designed to assist the operator during the knife setup stage of the slitter operation.
Auto Knife Positioning
Center-Shaft Supports
Deacro’s rewind shaft technology and automatic adjustable rewind shaft supports, extend the capabilities of cantilevered slitters. Center-shaft supports are designed to allow heavier roll weights during the slitter runtime. After winding is complete, the center shaft supports automatically lower. This allows the finished rolls to be off-loaded onto a variety of receiving station options.
