R1300D Slitter Rewinder

R1300D Slitter Rewinder

RS1300D Salvage Rewinder

salvage rewinder equipment

A Salvage Rewinder For Master Rolls

The Deacro RS1300D offers converters an affordable, high performance single direction or reversible salvage rewinder. Designed to handle master rolls, the fully shaftless system requires no shaft handling. It will pick up rolls from the floor or pallet and unload the finished roll.

The RS1300D features Deacro’s unique sensitive tension control. Web tensions are controlled automatically with fully programmable taper tension for 0-100% for maximum control. The machine also monitors the diameter of the unwind and rewind roll and adjusts tension accordingly. The reversible RS1300D can reduce rewind times by 50-90%. This option also allows operators to orientate the print direction without running the roll more than once.

An optional feature includes upgrading to a two-motor reversible system. The reversible RS1300D can reduce rewind times by 50-90%. This option also allows operators to orientate the print direction without running the roll more than once.

A position regulated dancer compensates for roll inertia, providing sensitive tension control for extensible films, laminations and heavier web constructions. Web guiding is provided by a servo-actuated high speed side-lay system. Infrared or ultrasonic edge sensors are provided depending on material type.


related equipment

Slitter Model Slitter Type Rewind Diameter
Model R800C Salvage Rewinder 32"/800mm
Model R1000C Salvage Rewinder 40"/1000mm
Model RS1000D Salvage Rewinder 40"/1000mm

 

R800C

32" Max Rewind Dia.
  • Web widths: 12″/24″/32″ (300/610/800mm)
  • Small footprint
  • Cantilevered Unwind
  • Cantilevered Rewind

R1000B

40" Max Rewind Dia.
  • Web widths: 12″/24″/32″ (300/610/800mm)
  • Small footprint
  • Cantilevered Unwind
  • Cantilevered Rewind

RS1000A

40" Max Rewind Dia.
  • Web widths: 63″+
    (1600 mm+)
  • Small footprint
  • Shafltess Rewind/Unwind
  • Roll Pickup From Floor

RS1300D

50" Max Rewind Dia.
  • Web widths: 63″+
    (1600 mm+)
  • Shafltess Rewind/Unwind
  • Overhead Webpath
  • Roll Pickup From Floor

Save Time

If the beginning of a roll needs editing, operators no longer need to run the entire web. Simply stop at the part of the roll that requires editing and reverse back to complete the rewind. This saves time and allows converters to quickly move onto the next job.

Quality Rewinds

When a roll has an especially poor profile, a single direction machine may require running it through more than once. A reversible rewinder can run back and forth over the roll’s roughest areas to give the best profile without running the roll through more than once.

Operator Friendly

Deacro’s salvage rewinders are designed with the operator in mind. A simple to use touch control screen interface allows direct access and editing to the machine’s running parameters.