The Future of Automated Slitting
A differential rewind system compensates for web gauge variation, allowing the T610C to rewind non-uniform web constructions. Differential air shafts are available to accommodate a wide range of core IDs and provide a high speed rewind roll change-up. Additional features such as outer shaft supports, extend the roll weight capacity on the rewind shafts. A programmable lay-on system can also be used as a common or individual roller configuration.
After the finished rolls have been removed, the operator simply slides new cores onto the rewind shafts to continue the slitting cycle. A set change is as simple as recalling a new file through the color touch screen. Operators never need to handle rewind tooling, handle shafts, setup knives or manually move rolls.
related equipment
| Slitter Model | Slitter Type | Rewind Diameter |
|---|---|---|
| Model T10A | Turret Duplex | 10"/250mm |
| Model T300C | Turret Duplex | 12"/300mm |
T10A
- Web widths: 13″/16″ (330/400mm)
- Duplex Rewind
- Center-Wind Design
- Cantilevered Rewind
T300C
- Web widths: 63″+ (1600 mm+)
- Duplex Rewind
- Center-Wind Design
- Cantilevered Rewind
T610C
- Web widths: 63″+ (1600 mm+)
- Duplex Rewind
- Center-Wind Design
- Cantilevered Rewind
Improve Your Roll Quality
Auto-Cut & Transfer
The T610C uses a unique concept called ‘auto-cut & transfer’ that automatically cuts and re-tapes (transfers) the web to a new set of cores. This is accomplished by having a set front and rear rewind shafts that automatically index 180 degrees. When the winding is complete, the shafts index, or ‘turret’ forward allowing access to the finished rolls.
Downstream Processing Automation
Deacro’s unique modular system allows for additional automated procedures such as roll labeling, wrapping/bagging, weighting, palletizing, pallet handling, pallet wrapping and pallet labeling. Multiple slitters can unload rolls to a central conveyor system that moves the rolls downstream for packaging.
Save Time Setting The Rewind
Reducing slitter setup time is a necessity in today’s market. Because of this, Deacro offers a variety of quick rewind setup options with its laser core positioning system and differential air shaft technology. These features allow operators to save time during rewind setup. To locate cores, operators simply slide cores across the cantilevered shaft. After cores have been moved onto the shaft, the laser locating system automatically indicates the precise location of the core for easy, quick and accurate placement on the shafts.
Laser Core Positioning
Save Time Setting Knives
Deacro offers a range of automatic and manual knife setup options with its auto knife positioning system and digital knife display technology. Deacro’s auto knife positioning system allows operators to attend other areas of the slitter while the knives are automatically being positioned. For manual positioning, Deacro offers the digital knife display. This feature displays the current knife location in relation to the pre-set location. These features are designed to assist the operator during the knife setup stage of the slitter operation.
