T300C Slitter Rewinder Overview
The T300C twin turret duplex cantilevered slitter rewinder is available in rewind diameters up to 24”. The ability to setup cores on the outer rewind mandrels for the next cycle during the slitter runtime, produces unmatched throughput. The auto cut-and-transfer system yields a transfer time of approximately 8 seconds.
A differential rewind system compensates for gauge variation allowing the ‘T’ series to rewind non-uniform web constructions. Differential air shafts are available to accommodate a wide range of core I.D’s and provide a high speed rewind roll change-up. Shaft supports extend the roll weight capacity on the rewind. A programmable lay-on system can be used as a common or individual roller configuration. Maintenance free A.C vector drives complement a totally digital control system material making it through to the rewind.
Downstream Auto Processing
Deacro’s unique modular system allows for additional automated procedures such as roll labeling, wrapping/bagging, weighing, palletizing, pallet handling, pallet wrapping and pallet labeling. Multiple slitters can be setup to unload rolls to a conveyor system that moves the rolls downstream to a central processing location. This technology can reduce the required labor and ensures that the slitter production is not limited by the roll handling requirements.complement a totally digital control system material making it through to the rewind.
T300C Tape Slitter
- Turreted rewind
- Auto palletizing
- Auto-cut & transfer system
- Outboard shaft supports
- Setup cores/unload rolls during operation
- Programmable lay-on roller pressure
- Pneumatic/servo taping options
- Differential lay-on option
- Auto core loading
- PLC control
- Auto roll unloading
- Touch control screen interface
| Rewind Roll Diameter: | 12” | 300 mm |
| Unwind Roll Diameter: | 40/50” | 1000/1300 mm |
| Max. Web Width: | 63” + | 1600 mm + |
| Max. Web Speed: | 1500/2000 fpm | 450/600 mpm |
Turret Slitter Technology