C800 Slitter Rewinder


The C800 is the most technologically advanced duplex cantilevered slitter rewinder in the converting industry. Deacro’s innovative slitting machine, rewind technology and servo-actuated lay-on roller system deliver the ability to rewind even the most difficult light gauge films and complex laminates. The C800 can be operated in a ‘minimum gap mode’ for adhesives or cold seals as well as a dedicated narrow width option for narrow web rewind applications. Innovative designs have slashed required slitter setup time. At the touch of a button, the C800 slitter can be set to the correct running parameters. The C800 slitter rewinder can automatically position knives and cores, or it can indicate the core location for the operator. When the slitter rewinding is complete, the C800 can automatically off-load the finished rolls onto one of our many different roll handling products. After the finished rolls have been removed, the operator simply slides new cores onto the rewind shafts to continue the slitting cycle. A set change is as simple as recalling a new file through the colour touch screen. Operators never need to handle rewind tooling, handle shafts, setup knives or manually move rolls.

An inspection option for the C800 Slitter Rewinder
A knife system cutting material during a run cycle.
Safety fencing options for the C800 Slitter Rewinder.


Rewind Roll Diameter31.5"800 mm
Unwinder Roll Diameter40/50/60/72"1000/1300/1500/1850 mm
Max Web Width63/70/80"+1600/1800/2050 mm
Max Web Speed2000/2600 fpm+600/800 mpm+


Deacro’s roll lock differential air shafts

Auto Roll Lock Differential Air Shafts

Deacro’s roll lock differential air shafts are ideal for tension sensitive materials, clean running environments and rapid setup applications. Roll lock segments are stacked across the shaft eliminating the need to setup spacers. When rewinding is complete, the roll locks can automatically disengage for the finished rolls to be unloaded. Deacro offers a variety of designs for custom cores and with technology that can lock and unlock automatically and lock in forward and reverse winding directions.

Closed-Loop Rewind Tension Control

The closed-loop rewind tension control option gives operators the optimum level of control over the rewinding process. This option is particularly helpful for converters running tension-sensitive materials such as light gauge, extensible films. Load cells are used to read the actual tension and adjust the torque to the rewind shafts automatically for closed-loop rewind tension control. The slitter control system automatically adjusts the air pressure in the rewind shafts. This adjusts the rewind tension to match the load cell readings. This maintains the desired tension based on the base tension setting, taper tension setting and current roll diameter.

A screen displays Closed-Loop Rewind Tension Controls

Servo/Auto Laser Core Positioning

To reduce setup time, lasers can be supplied to indicate the rewind core locations. Operators simply line up the cores with the lasers. The servo positioning version eliminates the initial setup and positioning of the lasers. The operator waves a hand near a sensor to initiate the laser to move to the next required core position as saved in the file recipe to match the positioning of the knife locations.

A machine fitted with a manual laser core positioning system

Manual Laser Core Positioner

The manual laser core positioning system uses multiple lasers to indicate the required location for cores on the rewind shafts. The position of the lasers can be easily adjusted by the operator with quick disconnects and tool-less locking. After locating the lasers, operators simply line the edge of the cores with the laser for quick and accurate positioning

Roll Pushing

Automatic unloading of finished rolls onto a receiving tree can reduce the slitter downtime between set changes and provide increased safety for operators. The electric design provides smooth removal of the finished rolls at the touch of a button.

Overhead / Web Path Options

Deacro offers a variety of web path options including the standard underfeed, optional overhead (for clean room applications) or an extended inspection web path option. Extended web paths can be used to add secondary processes such as web inspection while allowing defects to be stopped at a central location for web editing before defects reach the slitting section.

Rear Position / Standard Splice Tables

To assist operators with quickly splicing in new master rolls, a rear position splice table is available. Pneumatic web clamps or combination vacuum system assist with quick and accurate splicing directly from the unwind location without needing to rethread the web to a downstream splicing location. Typically used for printed web editing, pneumatic web champs hold the web in place for the operator to perform quick and precise splices while keeping the print registration. Vacuum clamping is also available.

Safety fencing surrounding a Deacro machine.

Safety Fencing / Scanners

Deacro offers a full range of safety features to ensure safe operation while maintaining operator access as required. Flexible designs use a combination of safety fences, gates, light curtains and programmable laser scanners to suit every application.